EG4 Community Forum

Anonymous
Joined: April 26, 2026 10:26 pm
Topics: 7 / Replies: 19
Reply
RE: Important Update: LCD Version 18 Firmware

The latest firmware for the 12kPv would be FAAB-2021. It looks like your inverter did not completely finish updating.To ensure the screen displays the...

11 months ago
Reply
RE: Lights Flicker in "Off-Grid Mode", On Grid problems

@adwilson254Most of the time, when people have flickering lights, it's caused by wiring issues but not always.Where do you have your PV grounded?

11 months ago
Forum
Reply
RE: What is latest firmware?

The latest firmware version is 191011. If you see this listed under the Firmware Version tab, it means your inverter is up to date.

11 months ago
Forum
Reply
RE: Trump Tariffs and Price Hikes

I am currently interested in buying EG4 LifePower4 or EG4-LL batteries and I had the same question. It would be interesting to know if EG4 is alread...

11 months ago
Reply
RE: 6000XP with electric, on demand water heater

@eg4eric Thanks--I didn't see anything about automatically shutting off in my documentation. Looks like the electric on demand heater isn't a viable o...

11 months ago
Forum
Reply
RE: 6000XP with electric, on demand water heater

@dannybeardsley Thanks for the feedback. Heat pump is not an option--can't justify the expense. We have an off-grid cabin, with a 100 gallon tank and ...

11 months ago
Forum
Reply
RE: EG4 6000XP W028 - Battery 100% PV output limited as batteries are fully charged

@eg4eric, the detail of his system's solarPV input being curtailed down to only support the load is likely an issue since there's no way the MPPTs ca...

11 months ago
Forum
Reply
RE: Portable Generators (?)

I use a small 2000W 120VAC portable generator for exactly the scenario you have in mind - I use it to charge the battery bank and nothing else. In my ...

11 months ago
Forum
Reply
RE: EG4 6000XP W028 - Battery 100% PV output limited as batteries are fully charged

@eg4eric I DM'd my serial number to you. I had a few more instances of EPS overload when turning on the Microwave.

11 months ago
Forum
Reply
RE: What is latest firmware?

Same thing happening here as well. I think. Ran the update, appears to have been successful but still show one available.? Thanks, JB

11 months ago
Forum
Reply
RE: Portable Generators (?)

I have a portable generator (20 amp; split phase) that was being used to power our home during grid outages for the past 8 years. It connected through...

11 months ago
Forum
Reply
RE: LL and lifepower4 24V batteries in series for a 48V inverter

EG4 does not have an inverter system for 24v.I have been using 24v for many years, although I use it asa basic UPS, just offline as long as the batter...

11 months ago
Forum
Reply
RE: Lights Flicker in "Off-Grid Mode", On Grid problems

@frugal-farmer I have 3x EG4 Indoor wall batteries and the inverter has the bms current limited to 600A, so that should be more than sufficient to pow...

11 months ago
Forum
Reply
RE: Important Update: LCD Version 18 Firmware

I noticed that the "current distribution" V18 firmware is still from November 2024. From this discussion, it seems an update is offered. When will...

11 months ago
Topic
Forum
Replies: 2
Views: 1624
Page 173 / 390