@george-redingerLooks like you have Battery Priority Start time set to 8:00am. This will cause for the inverter to use as much PV as possible or all t...

@haitises The issue appears to be due to failed internal components that require replacement, which is not a repair that should be performed by an end...

@fredericb Of Course! I will definitely share this idea with our team and put in a request to add this.

Is everything working now? Your batteries appear full at 53V. I recommend switching the system to lead acid and setting the bulk/absorb charge to 56...

Well That didn't go well. Initiated from where with auto-restart selected. Result: Inverter shut down and will not restart. Drove 60 miles t...

Thanks Eric, I found it. Signature Solar had told me that the data was not available so I had stopped looking. It is very useful and for now I can use...

@pawnee @eric When the generator is running and producing AC the inverter passes the AC through to power your loads and also converts the AC to DC to ...

Just a thought- If this fixed the problem, do you think you may have a bad cap or caps in your inverter? If this issue was caused by these common app...

Any idea what the issue is? I only have one of the 4 working. Should I physically disconnect from the EG4 cabinet the defectives or leave with the bre...

So a tech from Signature solar offered to update my firmware. It now shows the version as EAAB-2021. Is that the latest version? The power figures on ...

I may be experiencing nearly the same thing with the 6000XP

Hi Eric. It's Maui 12Kpv. A tech at Signature Solar offered to update the software yesterday, the current version after his update is EAAB-2021. I'm n...

I understand how that works, but as you can see in this graph and all those that I've posted, the power draw is nowhere near my discharge amps limit (...