I mean batt are in series. two 24 volts =48v

Eric, to be honest, I have already told you in detail what is happening from my prospective. If you are truly interested in a fix, then EG4 needs set ...

screen shot shortly after settling down

6000Xp

Eric EG4 here is the video you asked for. This video is just after the voltage hits the voltage set point. All three 6000XPs are doing the same thing....

I cannot video it because last Monday I called EG4 and had them roll back the firmware too the 190DOE. The three inverters are acting better. Instead ...

Doing more study on at what point the oscillation starts it at 56.5v. It then starts to over run that up to 57.1 or so maybe higher then down to 54v -...

Are you referring to balancer as in Lithium cells, Lead acid cells are balanced by equalizing as in overcharging the battery. Which by the way I haven...

What is a Balancer and why would that work or be needed. By the way the inverters work well until they hit the 57.1 v then go crazy. It appears that t...

Those are two 1000AH batteries in series which keeps them at 1000AH.

Lead acid, two 24-volt fork-lift batteries wired in parallel. All three inverters are individually hooked across the 48 volts. I should state that the...

I just added a third inverter 6000xp to my set up. while doing so I updated all three parallel inverters to this 1C1212. I now have wild fluctuations ...