Howdy. Hopefully this will save someone the $3K the lesson cost me! My biggest mistake was under estimating the amount of water I would need. Nee...

@eg4eric Yes. After that didn't work, i tried every code under the lithium section.

@henderson Usually, communication works with Luxpower protocol which is Lithium Type: 6. Is that the protocol you tried on the inverter?

That is not normal behavior, do you have PV and batteries in your system?

@cowsaround After speaking with EG4 Tech support (903-609-1988 option 2) I decided to use the solution that Krzysiek_KTA used. The Tech I had on th...

What are the advantages of having weather optimize on for an off-grid setup? Thanks.

My biggest mistake was buying 24V batteries instead of 48V. At the time 24V batteries were much cheaper, but running series parallel with so many bat...

Update:I performed a full system shutdown and restart, grounded my PV array separately and removed some panels from two of my strings to drop my volta...

The 12000XP can output approximately 50 amps continuous and 75 amps peak. I use an 80 amp breaker in my combiner box (for paralleling) but my shop is...

It sounds like a click of an internal relay.

I know there was one issue on YouTube from Ray, but that was due to not checking the output first to ensure that the inverters were synchronized. Thi...

Good information, I'll make sure to download copies of the existing EG4 products that I own. Thanks!

I have a few 12000xp's and have mine setup with 8 panels in series for each string. 9 can be done, but I didn't want to push it, especially with the ...

@bporter Let's see if your blackouts will be gone for good with Lead Acid battery settings like in my case. Regarding missing SoC display it doe...