Similar issue here. GB/FB21 and 3 indoor wall-mount batteries. EG4 set me to lead acid to see if the issue goes away. No issues for 6 days. I had ...

@eg4eric I am using Ruixu server rack batteries (RX-LFP48100) and like @chase, I haven't been able to get type 6 to work. I also did originally have s...

@dougl Thank you. For the wires coming from the screw terminals, are you connecting to something like this? Or do you have another approach?

@weertske I'm just running PPG on an rPi with it setup to send MQTT messages to a Mosquito MQTT server and then I have Home Assistant pulling the MQTT...

@dougl I just found this thread and I am hoping you can bring me part way up to speed on using PPG. I also have an 18kPV. How are you connecting t...

@eg4eric If i make one of the LL-S units the cluster master and put the 2T18 firmware on it, can that version still communicate with the 2T12 firmw...

That sounds like an internal issue. I recommend reaching out to your distributor.

Good afternoon, You're right, the sticker is a little confusing. The inverter allows 8kW output, but it can take in 12kW of solar. This unit is consid...

@spencerowen Glad you were able to get it fixed and thank you for bringing it to my attention! I'll let our team know about the time to hold the butto...

Unfortunately, that isn’t possible, as the Mini Split is designed to operate only on solar or AC power. To use the batteries, you will need to use the...