Here’s a question. My voltage example works from 46-55.3 If my 18k says the batteries are 52.2 and I measure them with a meter they are 52.2 volts b...

Check the battery voltage and don’t worry about SOC if storing. If they go dead you could have problems. I think max loss is 3% per month but could be...

I don’t think there is anyway to get the 18k to communicate with the 6000’s. I could be wrong but I think that’s a no go. That being said if you are p...

SS has free shipping this month. If that helps

Hello 12000xp updated firmware 405 I believe. In the local monitor app there is a setting under “Discharge Setting” called “System Discharge Power...

I have the same question. Was this ever resolved?

@joel-brodeur thanks. I’m wondering if that is my problem because it doesn’t cooldown it just kills the gen as shown in my brownout video.

@pawnee The gen cool down for the 18K should be under the gen settings: As far as what to set it for, you might look into your Gen manual. Dif...

Eric asked me about Gen cooldown but didn’t elaborate. I’m going to put my system on the monitoring website this weekend and look for that setting. Wh...

Are both legs balanced out?This could also be because there is too much load on one leg.