The latest firmware version is 191011. If you see this listed under the Firmware Version tab, it means your inverter is up to date.

I am currently interested in buying EG4 LifePower4 or EG4-LL batteries and I had the same question. It would be interesting to know if EG4 is alread...

@eg4eric Thanks--I didn't see anything about automatically shutting off in my documentation. Looks like the electric on demand heater isn't a viable o...

@dannybeardsley Thanks for the feedback. Heat pump is not an option--can't justify the expense. We have an off-grid cabin, with a 100 gallon tank and ...

@eg4eric, the detail of his system's solarPV input being curtailed down to only support the load is likely an issue since there's no way the MPPTs ca...

I use a small 2000W 120VAC portable generator for exactly the scenario you have in mind - I use it to charge the battery bank and nothing else. In my ...

@eg4eric I DM'd my serial number to you. I had a few more instances of EPS overload when turning on the Microwave.

Same thing happening here as well. I think. Ran the update, appears to have been successful but still show one available.? Thanks, JB

I have a portable generator (20 amp; split phase) that was being used to power our home during grid outages for the past 8 years. It connected through...

EG4 does not have an inverter system for 24v.I have been using 24v for many years, although I use it asa basic UPS, just offline as long as the batter...

@frugal-farmer I have 3x EG4 Indoor wall batteries and the inverter has the bms current limited to 600A, so that should be more than sufficient to pow...

I noticed that the "current distribution" V18 firmware is still from November 2024. From this discussion, it seems an update is offered. When will...

I'd like to see this too.

Update: Just shy of 6 days since time set. clock now running 23 seconds behind.