@jsaginaw I used an oscilloscope when 8 first started trying to solve this issue. The inverter outputs a sine wave, but I didn't study it very close t...

@CoolRunnings very neat find - I found this thread as I was wondering if anyone had added bus capacitance to the output of the 18K, but to solve a dif...

@eric Thanks, Here's a screen shot of EG4 18kpv behavior following my most recent settings (above ,Remote_Set_2025_03_21.pdf) One interesting b...

I've been following a protocol spec from Pylontech (RS485 pylon version 3.2). Is this the spec that the 6000XP implements for Lithium Type: 2 ? OR is ...

@eric Some progress. The contractor pointed out to me that I have 4 strings, and the Sol-Ark 15K has 3 MPPTs. I am allowed to put a max of 2 strings...

Same problem this morning...grid went down and backup load power went out. Battery was charged (and charging) and both solar systems were producing po...

@wardo5757 It happened on two separate inverters. Some people have mentioned it. One guy had a laser printer that did it. People on the Diy solar foru...

@helidriver I did some reading on other forums, and it looks it might not be possible.

Production has not stopped, but they are currently out of stock. I apologize for the inconvenience!

@george-redinger Let me know how this works for you. If the inverter is not operating as you want it to, please let me know and we will do our best to...

@dfwtinkerI apologize for the delayed response, but it looks like it's already resolving the balancing issue. Yes, letting it cycle a few days would b...

@eric When I was finally able to get online this morning i noticed that the SOC on my batteries were wildly different (87 & 77%) after only about ...