@jared From my photo i posted earlier at the top of the picture it shows Ver 1.0 is that the firmware version?

@jared Yes because of the setting I placed. I had the battery discharge to 48V and it seems to go down to 45-46V very fast from 50w drain..... Now wi...

@jared Here is one of the 2 batteries that cycled almost 1 month daily empty to full. I had it on Voltage control and now moved it to Closed loop. 51...

So I set my SOC to 1% but the voltage is 50.92V which is higher then the 3% SOC. I understand during discharging it will read lower and during chargin...

So while in closed loop I set battery to go to 3% which corresponds to 50.69 and EG4 tech support I recall them saying 46 is 20% and 44.8 goes into BM...

Super happy, got my 3rd battery replaced and now running all 3 seamlessly. No faults. All three were charged to 100% to 55.9V and now its 9:00am down ...

@jarrett What is your contact information at EG4? Please email me you contact info [email protected]

Ok now down to 5% and my voltage is 51.07 (not charging or discharging) static. So still question if this true 5% SOC....What I understood after many ...

My edit got wiped. now typing again.... The contract is 3yrs: 12.1 cents 500Kwh 16c 1000Kwh 17.9 2000Kwh. The charge and buy back is 1:1 14.5 cents....

By the way I came to learn if you want to compare Apples to Apples, you must read the EFL and compare EFL to EFL otherwise you will miss something.......

Here are SOC vs Voltage... I was taking the battery down to 46v based on setting one of the EG4 tech guys ..but that is too low. so wanted to see taki...