I am only familiar with 6000xp with EG4 wall mount battery. Below are my settings for Lead Acid (as per SS tech support) BTW For some reason ...

@krzysiek_kta I'm calling EG4 support again in the morning. What Voltage did you use for charging the wall mount batteries in the lead acid mode? ...

Maybe I should re-phrase the question...I have a new clean 24K EG4 solar Mini split.It is currently connected to ~2500 watts of PV. panel and 240 VAC....

The End Is Near! The entire shed is now fully enclosed and sealed (except the doors). So now the "Environment" being "controlled" is (10 x 6.5 x ...

DONE - Re-Add Support for Legacy Products to the EG4 Website It seems that this is already done, though in a separate place on the EG4 site. Not sur...

Mark Cables With Exact Configurations After years of purchasing EG4 products with their included cables and buying separate specific cables, I now h...

Re-Add Support for Legacy Products to the EG4 Website I'm not sure why support for older EG4 products was removed from the website, but this is cert...

@bporter It might sound awkward, but you may try to change battery type settings in your inverter to Lead Acid and see if that changes the behavior ...

Middle of Summer Reality Check. Back in a November post I presented some numbers regarding output and my plans for the future. I also...

Yes I have Grid Sellback enabled. I am also using the weekly mode feature of my inverter, if this makes a difference but it is similar to the "workin...

@eg4eric No, the batteries either go into Protected Mode or the breaker immediately trips. The inputs read a dead short across the Red/Black inputs...

Does the dongle have all 3 lights on? If not, can you please let me know which ones are on or blinking?Can you elaborate more on your question "What d...