@ouijifour thank you for sharing. I'll start reading to try to figure it out. Strangely, today after switching my settings back to FLA lead acid, my...

@dtbaker61 That cycling from float to bulk back to float is exactly why I quit using the eg4 xp6000 for charging lithium batteries. There are a lot be...

@dtbaker61 you may want absorb time to give the bms time to balance the cells . They only will do that at the top of the charge cycle. It really depen...

looks like update to ccaa-1c1212 fixes this for the 6000xp. see details and notes:/p>

I'm following up on the best available fix for the 6000xp open loop charge control.... which is to do a firmware update to version ccaa-1c1212 which i...

@mtjag you do NOT need or want any absorb time with Lithium batteries

@eg4eric Thanks, I'll give it a try and let you know if that clears it up. Scott

@eric, Interesting little experiment. I've exported data for Oct 2025 - Feb 2026 ( through today). I then dropped it into an AI and had it analyze. ...

I was able to script out an export that pulls a sheet for each day in a range. That works, but it'd be great if we could just export all data for a ...

@mtjag this looks like it has support to work with eg4

@mtjag Take a look at this project - it seems to do what you are are thinking. There is also another on github called yam bms that might be similar. ...

@dtbaker61 you seem to have some insight regarding the lack of Absorb time the EG4 inverters are lacking. With that in mind, I have an EG4 18Kpv that...

After a month of trying to get an accurate answer from EG4, it appears the accurate answer is that the EG4 18Kpv does not support being able to set an...

Make sure once that once you download the firmware, you go back to your Wi-Fi settings and connect to the dongle's network.