@britton-beckham @eg4eri, I just got the EG418Kpv and have the same request. This is the third day of having the EG4 and I still don't know if my gen...

  @eg4eric A couple of lights (LED, maybe 25 w), the furnace (2,000 w), the clothes dryer (5,500 w), and at the most our refrigerator and sm...

I understand, but I currently don't have a long enough LAN cable, so I would like to set to lead- acid in the meantime with no communication.

@eg4eric I had the Gen start set at 50.2v, so the generator failed to activate and start. Still trying to find out if the EG4 will start the generato...

I do not see anything both on the web as well as the app.. it was working fine few days ago.. here is the screen shot...

@rick151You can try setting the inverter to Battery Type: Lithium and Lithium Type: 2 (Pylon Protocol)

@sgazulaCan you share a screenshot of what you see?Are you using a computer?Everything is working normal and there should be no issues.

@eg4eric Could that PV input be some type of benchtop power supply, rather than solar modules that I don't have at home.

@jxnhrpr As long as the inverter has at least one power source, the firmware will install. However, if PV is not connected to the inverter, the MPPT p...

I had the same issue, but it begs the question: Why would you NOT set the battery type to EG4 rather than "1"? They are EG4 batteries. I have wasted a...

@mtjag Do you know what the voltage was on the batteries when the inverter shut down?

Hi, I am unable to see anything on the monitoring site for my system still.. do I need to do something here? thanks

@cgrecoWe would need to know exactly what loads were on, to figure out if it was truly pulling 12kW to the load.

@yooperjay mmmmmm, this is not generator transfer related in this case either as there isn't one hooked up. This blink occurs when charging by regular...