If you look at the mobile app, the correct battery capacity shows there. For my own system, I have 4x indoor batteries and it shows as:   Bat...

@eg4eric Are the LCD screens working? Yes, screenshots attached for both my batteries showing Z02T11 Does the monitoring show the correct batter...

@powerup I apologize for the inconvenience! Our team is aware of this issue and are currently working on resolving this issue. Does the monitoring sho...

@solargearWe will ensure this gets corrected. The latest firmware for all batteries is available on each product page. We were advised that installing...

I got the Battery low voltage message and it stopped charging my battery after 80%. Do we get this kind of behavior in cold conditions, like a tem...

WARNING: Please refer to this other forum post. Latest firmware is known to Brick the battery.

We just joined your Party. Our remote clients batteries are now BRICKED. S02T25 & Z02T11 on 280AH wall-mount. The 12kPv system teases us by show...

@srafter2 I was able to set generator dry contact parameters in the android app for my Flexboss18. No microgrid options appear for me either. I can se...

Over a month and what's the verdict? I just installed a 12000XP and don't want to get jacked up by my electric company. Does it actually send power ba...

@rich0 I use a NEMA 14-30 plug but dial back the amperage on the car to 19amps. I start charging after 10pm when most large loads are complete. As lon...

@eg4eric News on fix for charging open loop by voltage ? I'd be happy to test. seems like developers should be able to spot the coding difference betw...

Yes

@swoods Thank you for this information! Everything should be resolved and no one should be having any issues. If anyone is having issues, please let m...