Well That didn't go well. Initiated from where with auto-restart selected. Result: Inverter shut down and will not restart. Drove 60 miles t...

Thanks Eric, I found it. Signature Solar had told me that the data was not available so I had stopped looking. It is very useful and for now I can use...

@pawnee @eric When the generator is running and producing AC the inverter passes the AC through to power your loads and also converts the AC to DC to ...

Just a thought- If this fixed the problem, do you think you may have a bad cap or caps in your inverter? If this issue was caused by these common app...

Any idea what the issue is? I only have one of the 4 working. Should I physically disconnect from the EG4 cabinet the defectives or leave with the bre...

So a tech from Signature solar offered to update my firmware. It now shows the version as EAAB-2021. Is that the latest version? The power figures on ...

I may be experiencing nearly the same thing with the 6000XP

Hi Eric. It's Maui 12Kpv. A tech at Signature Solar offered to update the software yesterday, the current version after his update is EAAB-2021. I'm n...

I understand how that works, but as you can see in this graph and all those that I've posted, the power draw is nowhere near my discharge amps limit (...

You can get this information on the Monitoring website under the Data tab and then navigate to Data History.Please let me know if you have any help lo...

@scottmr808 I'm glad you were able to get it replaced. If you have any other issues, free to reach out to me.

@scottmr808 i recommend leaving it on lead acid for a few days and make sure that the battery is charging fully to 56.2V and discharging to about 48-4...

@ponobill I'd be happy to help! Can you please provide either the station name or the inverter's serial number?

@electronThe issue with the 3rd PV showing voltage was a bug that was found on the website and had nothing to do with the firmware. That issue was res...