@colmckinney Happy to help! Feel free to reach out if you run into any other issues.

@donnie255 I apologize for the confusion. Doing this a few times a month is a recommendation. If you would like to do it every day that is okay as wel...

At this time, no. However, if anything changes, I will let you know.

It is recommended to discharge the batteries to 20% at least a few times a month. I've attached a document explaining why this is recommended for EG4 ...

1 - The guide indicates performing the recalibration monthly, how critical is that? I would say it is highly recommended. This will help prevent imbal...

You can change the Battery Type to Lead Acid and set the Bulk charge/Absorb to 56.4 so all the battery cells can charge and balance out. How often do ...

You would have to connect the AC couple to the GridBoss. It will not work if you leave it connected to the 18kPV. However, if you have any questions o...

@yachtdr22 I apologize for confusion, I didn't notice that you had a Sol-Ark system. This would only work with an EG4 system.

@yachtdr22 You should be able to view all Lifepower-V2 batteries by setting the first V2 battery as the master and assigning different IDs to the rest...

I went ahead and removed the old dongle from your account. Please let me know if there is anything else I can do for you.

@erickhj How do you have the batteries connected to the inverter?

For the Lifepower-V2 you can use BMS TOOLS using the RS-485 cable (pins 1 & 2) if you don't have this cable let me know and i can provide one for ...

Are you charging and discharging batteries by voltage? Meaning you have Voltage parameters set on the inverter.

Currently, there is no LCD firmware update available, but we will let everyone know as soon as there is.

You can use BMS TOOLS and BMS TEST to look at the battery details and information.