LED lights are very sensitive to voltage especially on a dimmer switch. You may or may not have a wiring problem. My led lights do the same on dim. Pu...

Messaged you privately. Thank you!

Thank you, Eric! I looked at the video and I am confused about the Batt Setup screen. I have three batteries and the video has only one battery. EG...

@ron according to my 18k screen and my amp meter the generator is not running the house at this point. The batteries are when the brownout occurs, or ...

I don't believe this is a firmware issue. Significant flickering is typically related to wiring problems. I recommend checking that the neutral and gr...

Eg4 inverters were only made to work together with the same inverter model. You can AC couple an existing grid tied system into the 12kPV; AC coupling...

@eric Thank you. Do you know what controller would work with this configuration?

Solar Assistant sometimes provides inaccurate information. If you don't have any warning or errors on the inverter, this shouldn't be an issue.

Do you have a BMS for the batteries?You will need a BMS if one is not already in place, as it manages and regulates the battery’s charging and dischar...

While it may be possible, it is not recommended since this configuration has not been tested, and the EG4 batteries were not designed to work with tha...

Both R1 and R2 should be down. If you are having trouble getting the communication hub to work, please let me know.

@wraytex Currently, there isn't a solution for this, but I will report it to our team and look into possible options.

I apologize for the delayed response. I am glad you were able to get the issue resolved. If you run into any other issues or need assistance with anyt...