For this, make sure that the Discharge current is set to 250. Also, try to keep both Leg 1 and Leg 2 as balanced as possible to prevent any overload i...

Does your laptop recognize the port? If it does, try to continue the update.

@scottmr808 Once you get the BMS tools going, we will be able to see what is causing this alarm. So, you are getting 51.4V on the battery?

I apologize for the delay; I was waiting for a response from our battery technicians. They advised that you will need external bus bars to connect the...

@dannybeardsleyIf you need help making these changes or would like for me to make them for you, let me know. Discharge Current Limit(Adc): 140 (Thi...

You can manually set the Grid Sell Back using the app or the monitoring website at 4 PM and disable it at 9 PM. However, there is currently no option ...

I was just informed that we are working on a firmware to fix this generator cool down issue. As soon as the firmware is available, I will let everyone...

I was just informed that we are working on a firmware to fix this generator cool down issue. As soon as the firmware is available, I will let everyone...

I don't believe A28 means it's a fault or warning code. You would see a frowning face if it was a warning or fault code. If it was a warning or a faul...

That happens sometimes, but the firmware versions are the same and will not impact performance.

One Flexboss should be sufficient, but it ultimately depends on your required output. Having two will provide more power, and you’ll have the flexibil...

@dannybeardsley Can you post screenshots of your settings?@frugal-farmer Yes, you can! You have the option to keep it in bypass mode or configure it t...

Awesome! feel free to reach out to me if you have any questions or need any assistance. You can a contact us via email at [email protected]

Hey @joel-brodeur Where are you seeing the A25?

Glad to see you got it resolved! If you need anything else or run into any issues feel free to let us know!