@sjvicker is all you need for the BMS is a laptop and a cord to connect to the battery. You can download the BMS test off of the EG4 website assuming ...

Yes, that is an interesting question. I've never heard of any benefit of deep discharging. My normal practice is never below 20% and monthly top balan...

Hello Eric First pic is the overview screen on the local monitor app Second is the local set screen under the discharge setting exspanded th...

After thinking about this for a while I wonder if the folks at EG4 might be willing to write up some TSB's regarding this subject? Maybe they could ...

@dannybeardsley On the 6000xp inverter screen - setting 22 - submenus AREC and EREC. Appears that it holds the last 20 events. Not exactly certain h...

Woah... I didn't know that was a thing. How do I access the "inverter logs" if not via the website?

I still haven't gotten around to any kind of Wifi connectivity on my inverters or connecting to my batteries. It's working so it keeps getting pushed ...

@nctarheel1980 @jared for sure is going to fix this remotely

I might be having the same issue? In doing an initial set up, I can't get past the message "Connect dongle of device failed" on the app. I can see the...

Since this thread is such a hot topic 🥴I thought I’d ask another question on proper 18k shutdown here’s how I do it. 1) Kill PV 2) put 18k...

@eric thanks

@eric yes they were around .2 volts difference so well below .5 volts. So if the batteries are in lithium mode should or we shouldn’t run in volta...

Yes, the Seamless EPS Switching would be the setting to make it smooth transfer. I will report to our team, so it can be clearer on this. Thank you!If...

I see what you mean, that is interesting. I will look into this and see if this has occurred to anyone else.

Yes, I did also mention the switching to generator. However, I believe most reports have been when switching back to battery. As soon as I hear the fi...