@solar2025 Thank you for your input! I will pass this along to our team for consideration.
@eg4eric Thank you!
@anothereg4user I went back and changed the text color of the link so it stands out more.If possible, discharging the batteries down to 20% once a wee...
@walkerYou can connect up to 6 in parallel before needing external bus bars. Does the breaker in the grid boss have any limitations on the number of...
1. Is that still accurate on current firmware, and is GridBOSS support planned? Yes, this is still currently accurate. 2. Reading the do...
I sent a reply directly to you.
Understood. As an enhancemet suggestion, I would like that data to be collected and displayed under the Data section, Energy tab. The relays may be o...
@solar2025 If Off-Grid mode is enabled on your system, I don't believe it will read any data from the CTs, since the relay is open and the system is n...
I looked into this and I can confirm that the inverter does require a Neutral connection. The only other choice would be to run completely Off-Grid.
@joseyuniergh In theory, it should work without an external neutral. Proper grounding is required because, according to the documentation, the interna...
@shankusmcAre you able to share your inverter's serial number with me?Do you have any videos of this happening? I would like to start a ticket so we c...