@jlankford On the 6000 the "AC Charge Enable" is not an option. I am assuming that since there is no sell back that the option is always on. (just an...

@pawnee Glad the update fixed the Gen run, did it also fix the Watt readings? Hopefully @eric has some news or suggestions on the hard handover. J...

@mylesj I am guessing you can't disable it. Maybe just set your gen start SOC to something like 20%. Also, if you haven't already, you might try, r...

One other question - what firmware are you at? JB

@mylesj I notice that you have the Gen settings also set. Are you using a gen to charge as well? If not you might try disabling the gen charge setti...

From the "E G 4 ® 6 0 0 0 X P M O N I T O R S Y S T E M W O R K I N G M O D E S" on page 4. EG4®-6000XP-Monitoring-System-Working-Modes.pdf

Have you tried setting you AC charge times to - 00:00 to 23:59 JB

@pawnee Just curious @pawnee what gen do you have? JB

@eric I don't know what @pawnee is running but I have a 6000XP with a 14KW Kohler (14RCA). I am not certain what the actual logic in the inverter do...

@pawnee Not certain if it is the same issue but it appears that some similar things have happened to other user: What I get from the post is that th...

@pawnee Have you looked at this thread? Supposedly the LCD update is included in the zip package: JB

Yay that the app update worked for getting the firmware update loaded. But weird about the Watts. 😱

Briefly looking at the string sizzing tool and making a few assumptions about your system and not knowing what your yard layout is like here is what I...

@cimedaca I am not sure what happens to the output when you parallel the two strings. In series a shaded panel or panels will definitely affect the e...

This time it happened to me, yesterday I lost internet for a couple of hours. I was hoping to be able to go in and look at the local data review logs...