@cptmorgemaker So, when you use quick charge while you have Weekly settings configured, does it work?

@dtbaker61 Hey there, I am in the same situation as you. I have some non-comms/dumb lithium batteries. I have figured out a work-around with the use o...

@dtbaker61 I agree with you 100%. This should be a TOP priority. I see the same problem with my set up regarding the open-loop current charge con...

@eg4eric I am having the same issue. I am looking at a photo of the SN and PIN but keep getting errors. I uninstalled and reinstalled the app, and a...

@eg4eric Thank you for your reply on this Eric - Are there any things I need to check to make sure or keep my batteries healthy (I was planning to set...

@gigemsteve07The only issue you should be having would be that the 100A battery will discharge way faster than the 280A battery and will cause imbalan...

Has happened again since I posted. Seems to be random high bus voltage faults on the Flexboss21. They are happening at night (so no solar production)....

Ever figure this out?  

Master unit 44700E0278 My slave unit 52601N0070 continues flashing its green normal light during operation but yet no alarms are pending or showin...

I got some feedback from EG4 support. Their preference in this situation is for us to install a meter collar (aka feeder tap) and make the interconnec...

@powerup That makes sense. The EG4 inverter let's you set time of day and do sell back without the CTs?

@cptmorgemaker We just tested this and it is working perfectly. If you are having issues, it could be happening only with certain settings set. Can yo...

@eg4eric I had a licensed electrician do the wiring between the main panel and the inverters, I did the wiring to the panels and cabled the batteries ...

@gigadude I am going to get with our team about this and show them the wiring diagram. I will let you know if we need anything else.