I might sound obvious but with your +7kW output from PV array it might be not "consumable". How it is related to your power consumption (also 7kW-ish ...

Another bunch of supporting data attached - this is from my previous (RMA-returned May 2025) 6000xp with same Wall Mount EG4 battery. there was only...

@scottmr808 It seems to me that there is comms issue with EG4 Wall Battery BMS, and not related to the Inverter as I have replaced my 600xp and oth...

@scottmr808 Have heard anything form EG4 regarding resolving the EG4 wall mount battery BMS comms issue - causing those irregular power losses?...

@bporter Let's see if your blackouts will be gone for good with Lead Acid battery settings like in my case. Regarding missing SoC display it doe...

I am only familiar with 6000xp with EG4 wall mount battery. Below are my settings for Lead Acid (as per SS tech support) BTW For some reason ...

@bporter It might sound awkward, but you may try to change battery type settings in your inverter to Lead Acid and see if that changes the behavior ...

@BPorter @Cowsaround Question. Do you guys have EG4 wall mount batteries set as Lithium Type in your inverters? Brgds K

Hi There I have similar same story with my 6000xp and EG4 wall mount battery setup with 3.4kW PV array. It developed 5 months after system installat...

@kuilor2k To put Sun as free electricity provider in context : Having tiny single 3.5kW PV array (on my small south facing patio roof) I have reco...

@kuilor2k Impressive setup! I have been on True Free nights for 12 + 12 + 58 months here in TX and finally Reliant refused to extend it further or...

In my experience when Wall Mount battery is set to lithium (closed loop) the battery voltage settings do not work - only SOC triggers charging: "Batte...

In January I designed and installed the solar array on my south facing patio roof do maximize the output. I did not think of throughout the day shad...

@eg4eric PM sent