I don't know if you solved your issue yet, but I used a generator control module from Atkinson Electronics--model: GSCM-WiFi. They were extremely help...

Reset it for the 10th time and it finally connected, working now.

As of this morning, the EG4 website does not have the 9540 cert on their website. However the listing did just appear this morning on the Intertek pro...

Based on the "EG4 Systems Battery Wiring Diagrams 2.0" document on the EG4 website, It would seem like they are only getting the certification for the...

So what is the answer? The manual strangely still lists the minimum wire size... I'm assuming 1/0 aluminum will fit the load and grid holes? ...

Thanks I just ordered 2 of them. I was wondering about the specs

@eg4eric Correct, it's blowing room temperature air. Both high and low side lines are air temperature.

@ravasunpower Not sure about the warning 18, but if in lead acid mode don’t sweat it. It will be ok as long as you have the high and low battery sett...

@bporter thanks for the reply. This is my opinion. Don’t get hung up on communication. My brain thinks in volts. The batteries have a high and low vol...

Thank You. Joe at Signature Solar is working on getting a ticket opened with EG4. A line set might fix the unit. I am guessing the refrigerant escap...

@pawnee the following thread relates to run the battery in Open Loop (Lead Acid) mode. My charge setting are set up accordingly - Its not idea...

@pawnee yes, i am now running the 2 wall mount all weather batteries in lead acid mode. The 6000XP was not charging up to the required voltage and i w...

Pawnee, Yes, both K and I (at least) have used this to try to make our solar systems work properly. We have different inverters but K has done som...