@gtsquires Because the manual and my configuration page says otherwise? From page 24 of the FlexBoss 21 user manual, v1.3.2 "For communication wit...

@eg4eric Thanks, is there anyway this could be added as a requested feature. It would be convenient if the inverter could turn itself back on at EOD +...

We apologize for the delay. A new firmware has been released for both indoor and outdoor WallMount Batteries that resolves the display error on the EG...

@eg4eric thank you. This new RS485 firmware is compatible with the previous RS232 firmware version S02T25?

We apologize for the delay. A new firmware has been released for both indoor and outdoor WallMount Batteries that resolves the display error on the EG...

We apologize for the delay. A new firmware has been released for both indoor and outdoor WallMount Batteries that resolves the display error on the EG...

@eg4eric I was able to visit the remote system. Unfortunately I only had enough time to bring the battery up to SAOC of 20%. The inverter was still ...

@eg4eric I'm using voltage...no comms. I've got the generator figured out now, thanks.

Certainly, thank you so much! I don't think I have a Ticket #, have simply been emailing back and forth with their tech support? or maybe I'm missing ...

Thanks that's what I suspected. I have 4 x 100Ah LifeP04 but that's not enough to power everything (hence the critical load panel) so now I am think...

@eg4eric More while we're on battery. I'll switch off Seamless EPS and see if that makes a difference.

@johnaand Understood! I wasn’t able to review any data because your inverter doesn’t appear to be connected to the internet. Based on what you describ...