@somej I have the SimpliPHI 3.8 52.1v LiFePO4 batteries that have a BMS but no comms. I've got them connected to my new EG4 18Kpv inverter and set to...

I did get a NOTICE but had been monitoring the voltage so I knew why it shutdown. The NOTICE cleared after the sun came up and the inverter restarted...

@powerup I went back to older firmware (see post from Posted : January 21, 2026 12:22 pm) ... back to working. I won't get back to the cabin unti...

@yooperjay You're lucky that you still see 1 battery. Both have disappeared for our client.

@yooperjay @eg4Eric Clients battery screens had the correct details AND displayed newest T11. Used the firmware adapter and both batteries issued Su...

If you look at the mobile app, the correct battery capacity shows there. For my own system, I have 4x indoor batteries and it shows as:   Bat...

@eg4eric Are the LCD screens working? Yes, screenshots attached for both my batteries showing Z02T11 Does the monitoring show the correct batter...

@powerup I apologize for the inconvenience! Our team is aware of this issue and are currently working on resolving this issue. Does the monitoring sho...

@solargearWe will ensure this gets corrected. The latest firmware for all batteries is available on each product page. We were advised that installing...

I got the Battery low voltage message and it stopped charging my battery after 80%. Do we get this kind of behavior in cold conditions, like a tem...

WARNING: Please refer to this other forum post. Latest firmware is known to Brick the battery.

We just joined your Party. Our remote clients batteries are now BRICKED. S02T25 & Z02T11 on 280AH wall-mount. The 12kPv system teases us by show...

@srafter2 I was able to set generator dry contact parameters in the android app for my Flexboss18. No microgrid options appear for me either. I can se...