@eg4eric , AHA! so this is a big problem for someone like me who is actually an installer and would like to look at multiple units at different physic...

@dtbaker61 You’ll need to create a new account. If you were running multiple units in parallel, they could be added to the same account. However, if t...

@davidmg Which firmware is the Gridboss running on?

@rbeato011 Great, if you need anything or have any other questions, feel free to reach out.

Yes, I would recommend for them to contact their distributor. I'm not sure why it isn't turning on after charging it for so long. If the battery is on...

You can use this String Sizer calculator. SolarPanelApp

@lyrawinslow Thanks.

you davidt can watch this video maybe it will help

@powerup I currently have a grid tie inverter, so yes I can sell power back. I have used emporias ct's in the past on the busbar connection They a...

Well, I managed to diagnose the issue with EG4 remotely - the main control board was found faulty. Had it replaced twice and eventually RMA entire o...

@krzysiek_kta Thanks for the response. Unfortunately EG4 wants the entire mini-split shipped to them for testing.

The EG4 website has a really nice panel calculator. Punch in the panel and inverter along with a few other questions and it will give you what you can...

Sorry, I don’t think there is a way to connect CTs when there is a busbar between meter and panel. essentially no wires to measure incoming current ...