Is there an update utility to apply this firmware update via RS485 cable to the auto-id batteries? I've previously tried the one included in the with...

@dtbaker61 Our team is working on a solution for this. We will let you know when this has been resolved. Thank you for your patience and understanding...

@eg4eric I thought a non-panel DC source might be possible because the EG4 Monitoring application has a PV Input Mode option of "0:DC Source". What...

@eg4eric a couple of other things to add regarding the generator. My installer was able to do the "Start GEN Exercise" using the button on the app ye...

@eg4eric yes and it was tested by combining the two wires and it worked.

  I, also, can confirm that I have lost functionality. I can't read or update settings via the website and have already rebooted the dongle on...

@jxnhrprI can’t recommend anything other than solar panels, as the MPPT inputs were specifically designed for that purpose.

@mtjagDo you have the 2 wire Start/Stop installed?I'm just trying to gather all the information.

If the batteries get bricked, most likely the wrong firmware was installed. There is a small issue with the data not showing properly, but it will not...

@britton-beckham @eg4eri, I just got the EG418Kpv and have the same request. This is the third day of having the EG4 and I still don't know if my gen...

  @eg4eric A couple of lights (LED, maybe 25 w), the furnace (2,000 w), the clothes dryer (5,500 w), and at the most our refrigerator and sm...

I understand, but I currently don't have a long enough LAN cable, so I would like to set to lead- acid in the meantime with no communication.

@eg4eric I had the Gen start set at 50.2v, so the generator failed to activate and start. Still trying to find out if the EG4 will start the generato...