Please prioritize this issue. The time needs to be correct for the time based controls to be useful / reliable.

I share this feature request. On a related note, it would be helpful if the dongle showed RSSI and if the dongle could be polled for RSSI prior to fin...

@eg4eric any updates on this? Will this be resolved in the new monitoring portal / app release?

@mccorb Hadn't heard of the Victron Autotransformer. Thanks for the info. I'll go take a look at the specs & pricing.

@eagleridge I'm glad you figured it out! I will definitely pass the feedback along to our documentation team. Thank you!

@frugal-farmer Here is the link to the Spec sheet for this inverter.EG4-6000XP-Inverter-Spec-Sheet.pdf

Are you sharing all 12 batteries with both inverters? Or does each inverter have its own battery bank?

Which battery are you using?Does your battery have Luxpower Protocol?

@ray Where did you see or hear about the Self-Balancing via BMS? I just want to make sure we clarify any confusion.

@ianscott that's a direct connect to the batteries and then you have to make sure the inverter and chargeverter play nice together while solar and gen...

@michaelahess Once you change the inverter to Lead acid, the SOC parameters will not matter since it's going based off of voltage. So, you will need t...

@ianscott That is the best solution!

Do I keep the SOC settings for charging and discharging, just up the absorb to 57?

I've been trying to keep it from 100 to 20, but it regularly goes to 8-10, even though I have the inverter cutoff set to 20%. It may need a calibratio...