EG4 Community Forum

Anonymous
Joined: April 26, 2026 4:00 pm
Topics: 7 / Replies: 19
Reply
RE: Random connection to Grid showing on display

Hello, I've got my XP6000 running my barn on backup power (EPS) with the battery (soon to be "batteries") being charged via solar. Operating well but...

5 months ago
Reply
RE: RSD Button press cuts power to home

Perhaps this is a "huge security issue", but for a normal house that does not have these systems at all, with the main service disconnect for the hous...

5 months ago
Reply
RE: Batteries disappeared overnight?

@ray You may have the same problem i having but I am on lead The system is reading the battery volt right but i have a 2nd battery disconnect if i tur...

5 months ago
Reply
RE: 18kpv AC Charge Mode window not using battery when full

The question is why doesn't the Inverter use the battery when set to Time+SOC/Volt but it will use it when set to SOC/Volt. Setting to Time+SOC/Volt p...

5 months ago
Forum
Topic
Reply
RE: RSD Button press cuts power to home

@potrero - I'm in exactly the same boat (GB, FB21, 2x outdoor batts) and see the same behavior. I see no good reason WHY the RSD to the inverter shou...

5 months ago
Topic
Reply
RE: 18kpv every morning powers load with pv but wont send any to batteries until inverter restart.

So I have narrowed this down to a logic problem in the inverter related to working modes. One with the AC Charge mode time window and the other when t...

5 months ago
Forum
Reply
RE: 12000xp open loop battery voltage bounces between float and bulk after batts are full

ok, getting back to the original concern.... As far as I can tell, there is NO WAY to obtain a "proper" open loop charge curve, (charge controlled b...

5 months ago
Forum
Reply
RE: Remote_Set_Error

The Remote_Set_Error appears each time the Weather Optimize feature tries to start a charge cycle. I have attached a composite of screen captures sho...

5 months ago
Forum
Reply
RE: 12000XP Low Charge Rate Using Grid

Discharge Current limit is for both Lead acid and SOC. The inverter should already come preset with that setting. It should only be changed if you wan...

5 months ago
Forum
Page 77 / 390