Yes, the 2 wore Start/Stop will work when Micro-Grid is enabled.

Are you able to share your station name or inverter's serial number so I can look into this for you?Prior to getting the E017, did you have any issues...

What settings do you have configured for the Generator Charge?

The Chargeverter will definitely help with the charging and cleaning up the dirty power. Thank you for updating us!

I know we are working on a new EG4 Monitoring app but don't have a release date yet. I noticed that your Lithium Type is set to 6. For Lifepower4-V2 b...

Make sure you have the Discharge current set to 280A. This has to be manually changed or else the battery discharge will be set to 140A which is what ...

What is your inverter's serial number or station name? I can take a look at it for you. For the Batteries SOC, you can Top balance them. Charging them...

@somej Thank you for the pictures! I sent them over to our battery technician. I'll let you know when I get an answer from him. Should be either tomor...

@jp-ouelletteWere you able to get this going?

If the grid isn't connected to the inverter, you can connect the generator to the grid port and enable Micro-Grid mode to prevent it from feeding powe...

8 AWG is what's recommended, but I have seen people use 6 AWGMinute: 12:45

@dtbaker61 I can definitely pass this along to our team. Lead Acid mode wasn’t designed for lithium batteries, which is why it won’t operate exactly a...

@dtbaker61 Awesome! Let me know if you need anything else.

@sylinxAs mentioned by EZPZ, the inverter will draw power from the grid at times when needed. However, the only way to completely avoid using the grid...

@dtbaker61 Send me your name, number, email and address and I will get someone to call you.