@zeppelin I've had zero issues, but have only charged the batteries with the chargeverter a few times during grid outages.

They product may be slightly different. I added second to mine and it was a little weird. I only use one sync cable. This worked for months, unti...

@ron I too had issues with my Off Grid system. All I wanted was to use the Gen port to trickle charge my batteries. No does full load charging, pas...

I enabled this feature for my user. I needs to have a test button to ensure that this feature works. Has anyone met the conditions and verified tha...

@eg4c Could you please let me know exactly how you have the generator wired to your grid boss? Is it possible to get some pictures? I was told that ...

@casinovarock23 I actually have the older XW+ units and the batteries are the 48v LL v1 and v2 units with a v2 unit acting as the "cluster" master....

@joel-brodeur That theory makes sense, if his system is wired that way. Would need to see a wiring diagram of his system to know. Don't know if he ...

@somej thanks for sharing your observations. I have a more basic question, how was the set up with the XW Pros with the eg4 wall mount powerpros? Clos...

@wvannus, Support did do the Parallel sync as well and it still didn't fix it. Thanks though.

@eric I was on with Tech Support this morning and we corrected the parallel cables so they should be set up correctly now. However, I still don't have...

@jlankford That makes sense, but if the power goes out, he plugs into the transfer switch, there shouldn't be any power on the grid side at all, corre...

@joel-brodeur He's using this inverter like it was a backup generator - he's plugging the output into a TS where a generator input would go. I pres...

@jlankford I was just thinking that if it is an ATS and the EPS output was somehow feeding back onto the "Grid" connection then basically the inverter...