@krzysiek_kta most of the xp series I have installed have been way off-grid with no wi-fi available, which makes firmware updates after install diffic...

@dtbaker61 Maybe new firmware will offer an alternative - look at the latest for 6000xp - new battery type 30 for lithium batteries in open loop ad...

A good Update. Full month has passed and all works as intended (no single blip/power interruption - like my first 4 months of owning 600xp with wall...

is it likely that the 12000XP will get 9540 ESS certified with the new WallMount 314Ah battery? (assuming the system has only the new 314Ah batteri...

I would assume that you can view the raw data stream from the inverter that contains all 3 PV streams. Also remember that all 3 PV's show up in my Hom...

Yes - That was one of the many things that I have already done. Everything was fully powered down at the inverter. Then I also have been doing a soft ...

Try uninstalling the app and then reinstalling it. Also, if you'd like, you can share the dongle serial number, and I can update the dongle for you. A...

I recommend doing a full reboot. Removing battery power, Grid and PV, while you do that, I will get with our R&D team to see what could be causing...

THX Eric, Got it, It seems like the safest bet is to have PV connected while there is few hundreds watts of PV production coming in....   ...

@krzysiek_kta I’m aware that some customers were able to update the MPPT firmware successfully without PV. However, I was informed that PV must be con...

@powerup You can charge both at the same time to 57V, the communication cables can stay as they are.

So I updated my LCD screen to 23/1/1. Still no change and still missing my solar 3 in the Web app. and -  

@eg4eric did this ever happen/is it gonna happen? planning out using a busbar for my chargverter soon and would prefer to make it an easy plug and pla...

Sorry - I now see the V23 firmware. Still - go ahead and remotely update it.

Yes - I had verified both the voltage and current for all 3 MPPT inputs and all are accepting power on there inputs. So the inverter is actually using...