More data related to the fault - This is what data history looks like when I look at Data History using the Web monitor - Notice that Vpv3(V) is...

A ha. That explains it. Some how the EG4 inverter monitor on your end got switched from an 18KPV to a 12KPV. Everything on my end points to the invert...

Yes - I did contact Dominick again to see where my shipment was. He said that they received a small shipment but was not enough to fulfill all request...

I would assume that you can view the raw data stream from the inverter that contains all 3 PV streams. Also remember that all 3 PV's show up in my Hom...

Yes - That was one of the many things that I have already done. Everything was fully powered down at the inverter. Then I also have been doing a soft ...

So I updated my LCD screen to 23/1/1. Still no change and still missing my solar 3 in the Web app. and -  

Sorry - I now see the V23 firmware. Still - go ahead and remotely update it.

Yes - I had verified both the voltage and current for all 3 MPPT inputs and all are accepting power on there inputs. So the inverter is actually using...

@eg4eric Sorry, meant to post last message directly to you and not to all.

I had been communication with Dominick Wheeler at Current Connected. I had recently placed an order for the dongle through them and the order date had...

BTW My home assistant reports all 3 PV inputs -

@eg4eric 4282670038

Update on Ethernet dongle. Apparently EG4 has been updating this dongle and had halted shipments of it. My understanding is that EG4 is releasing a ha...

So I see that there was an firmware update for the FlexBoss/18KPV/12KPV, which bumped it from EG4_FAAB-2122 to EG4_FAAB-2525. I installed this hoping ...