@dtbaker61 you seem to have some insight regarding the lack of Absorb time the EG4 inverters are lacking. With that in mind, I have an EG4 18Kpv that...

After a month of trying to get an accurate answer from EG4, it appears the accurate answer is that the EG4 18Kpv does not support being able to set an...

Make sure once that once you download the firmware, you go back to your Wi-Fi settings and connect to the dongle's network.

@bobandroslyn Correct, it could even also be the light bulbs but let me know if you find anything. I'll keep looking into this and ask our team what o...

@nickIt is available now through OTA. however, I will need to update your inverter first so that we can update the battery through OTA. If you send me...

Try putting the new V2 batteries without DIP switches as the master and the #2 battery. Then set the V2 with DIP switches and then the Lifepower4-V1. ...

I solved the problem. The Solar Assistant software was out of date. Updating the Raspberry Pi fixed it. FYI The RS485 is the top middle RJ45 labeled C...

@eg4eric More testing is needed. Anecdotally changing the Seamless EPS doesnt seem to make a difference. I'll do more testing. I wonder if there's...

@dannybeardsley , *most* LFP battery internal BMS will low-voltage alarm and protect themselves at 44 v. I would suggest you set your inverter LV cu...

Only if you think that there is a hardware issue with mine or a new version of software. Thanks.