Well in the time waiting for moderation as a new user, I updated the firmware from ceaa-000202 to ceaa-0405. Not sure this was the solution, but I've...

@slackware1995 Hey, really appreciate you taking the time to break all that down—it helped a ton. You were spot-on about the grounding. I’ve actual...

I am using an 18kpv inverter as an off grid system. PV array of 4 strings of 8 panels and 6 eg4 batteries in rack mount. I am set up to use a 12.5 kw...

@dfwtinker I agree but the number of kWh they are predicting has to be estimated by a guess of what size our arrays are. I would think they could l...

@eg4eric Thanks for the info and that's fine, I've got lots of options.

Not at the moment, the only way to stop the back feed would be to enable off-grid mode.

Can you please share your station name or inverter's serial number so I can look further into this?

Can you please share a screenshot of what you are seeing?Does it give you an option to bypass that and add the dongle/datalogger?

Now that the Chinese tariffs rates have come down quite a bit, will the reduction be factored into prices going forward?

@eg4eric Thank you!

@eg4eric I did actually get it worked out with Signature Solar support and rewired my panels from 3s2p to one series of 6 and that got me above the ch...

Which webpage are you referring to?Were you looking for a specific product? I could possibly help.

I could look at the battery with ID 64, but not the other 2. The manual said to connect to the RS485 RJ45 jack, so that is what I did. I assume it w...

Correct! It would be the same as they use very similar BMS. The Lifepower4-V1 use a different BMS, that is why they use BMS TEST.Please let me know if...