@eg4eric I'm using voltage...no comms. I've got the generator figured out now, thanks.

Certainly, thank you so much! I don't think I have a Ticket #, have simply been emailing back and forth with their tech support? or maybe I'm missing ...

Thanks that's what I suspected. I have 4 x 100Ah LifeP04 but that's not enough to power everything (hence the critical load panel) so now I am think...

@eg4eric More while we're on battery. I'll switch off Seamless EPS and see if that makes a difference.

@johnaand Understood! I wasn’t able to review any data because your inverter doesn’t appear to be connected to the internet. Based on what you describ...

@fkitzmann Can you please share a video of what you are seeing?You should be able to hold the button for 5 seconds to switch between Wi-Fi and Etherne...

@cnmmike Once the battery reaches the Discharge Cut-off voltage/percentage, the inverter stops actively discharging the battery and goes into standb...

@rpeatfieldFrom the way you described it, it sounds like the generator would only power the backup loads.

@harrisranch You will need to change the time is 3 different places. Configuration > Station > Edit > Set correct Time zone Config...

@powelljn50 Thank you for the feedback. I’ll be sure to share this with our team. The FlexBoss is designed to be installed alongside the GridBoss, tho...

@powelljn50 If the batteries are communicating with the inverter, you would need to set the Chargeverter to charge the batteries by voltage. Since the...

@cw218kYou can use this video as a reference. If you run into any issues, please let me know.This Saves A Lot Of Headaches For Off Grid Solar Users! E...

@natwall1 If you have the Indoor Wall Mount batteries read the post from "Krzysiek_KTA" above. The solution he found to the brown outs that we were...

I don't believe it will show data on that screen since the Gridboss is not an inverter. However, if you go into the Data history tab, you can see that...