Edit: just now saw Eric's helpful comment about my incorrect lithium type. That could have a lot to do with the issues I had below.. Will try that fir...

Thanks! I will charge everything to 57 volts somehow. I think if I set the batteries to lead acid and set max voltage to 57 and do a quick charge? Nor...

Well… I just did this update on the XP6000 and now i have error 0 and no power !!! HELP!!!  

@eg4eric Excellent!! Thank you very much for getting this!! All 48 batteries have been updated and I verified along the way that they were updati...

@powerup Yes, it does require interconnection with the home smoke alarms. That's the reason for my concern that a nuisance smoke alarm inside the hous...

If I get an ethernet dongle, can I connect to that locally in a similar way to the wifi dongle?

@mbbush I thought the First Alert/BRK HD6135FB would need to be connected into the home Fire notification wiring as well. On its own it could help wi...

This is also something I'm looking for. I especially want to be able to monitor the power readings from the various CTs in the gridboss.

As far as "what are the downsides of running in lead-acid mode", my assumption is that in an emergency the RSD switch would no longer trigger the batt...

The heat alarm I'm using is the First Alert/BRK HD6135FB, with the First Alert/BRK RM4 smart relay to convert the proprietary alarm interconnect signa...

Perhaps my original suggestion (as well as suggestion #2) above would be better suited to be in their own working mode. How about naming it "Grid Exp...

@somej Our battery technicians created a folder for you that includes the firmware for both the 4-DIP and 6-DIP switch batteries. For the 6-DIP switch...

  You may have reached a 100% charge but did you reach a full charge? One easy way to know if you actually fully charged your battery (and thus...