You may have reached a 100% charge but did you reach a full charge? One easy way to know if you actually fully charged your battery (and thus...

@eg4eric Thoughts? I should add to the above background info that my house is fully electric using heat pump for winter heating & existing batte...

@eg4eric they should be shared

@eg4eric If we have 2 Wall mount batteries do we need to recalibrate them individually? Or can we charge them both to 57Volts? Should we disconnec...

Please prioritize this issue. The time needs to be correct for the time based controls to be useful / reliable.

I share this feature request. On a related note, it would be helpful if the dongle showed RSSI and if the dongle could be polled for RSSI prior to fin...

@eg4eric any updates on this? Will this be resolved in the new monitoring portal / app release?

@mccorb Hadn't heard of the Victron Autotransformer. Thanks for the info. I'll go take a look at the specs & pricing.

@eagleridge I'm glad you figured it out! I will definitely pass the feedback along to our documentation team. Thank you!

@frugal-farmer Here is the link to the Spec sheet for this inverter.EG4-6000XP-Inverter-Spec-Sheet.pdf

Are you sharing all 12 batteries with both inverters? Or does each inverter have its own battery bank?

Which battery are you using?Does your battery have Luxpower Protocol?

@ray Where did you see or hear about the Self-Balancing via BMS? I just want to make sure we clarify any confusion.

@ianscott that's a direct connect to the batteries and then you have to make sure the inverter and chargeverter play nice together while solar and gen...

@michaelahess Once you change the inverter to Lead acid, the SOC parameters will not matter since it's going based off of voltage. So, you will need t...