@cnmmike Once the battery reaches the Discharge Cut-off voltage/percentage, the inverter stops actively discharging the battery and goes into standb...

@rpeatfieldFrom the way you described it, it sounds like the generator would only power the backup loads.

@harrisranch You will need to change the time is 3 different places. Configuration > Station > Edit > Set correct Time zone Config...

@powelljn50 Thank you for the feedback. I’ll be sure to share this with our team. The FlexBoss is designed to be installed alongside the GridBoss, tho...

@powelljn50 If the batteries are communicating with the inverter, you would need to set the Chargeverter to charge the batteries by voltage. Since the...

@cw218kYou can use this video as a reference. If you run into any issues, please let me know.This Saves A Lot Of Headaches For Off Grid Solar Users! E...

@natwall1 If you have the Indoor Wall Mount batteries read the post from "Krzysiek_KTA" above. The solution he found to the brown outs that we were...

I don't believe it will show data on that screen since the Gridboss is not an inverter. However, if you go into the Data history tab, you can see that...

@natwall1 Can you share the ticket number that Signature gave you if available or can you provide the inverter's serial number so I can look at the se...

@bobandroslyn If you have Seamless EPS switching enabled, you can try disabling it to see if that helps. As of now, I don't know any other settings th...

@eg4eric Ever since updating my 18kpv to FAAB-2525 I've seen way more flickering. Might give support a call, but wondering if there are any setting...

So, bought the EG4 Flexboss 21 last June/July 2025 from Signature Solar. I did NOT get the grid boss, so, it's completely off grid (managed through my...