There are only 2 MPPT's, one in the red and one in the yellow. Each MPPT has 4 inputs so you can parallel strings to bring in more Solar power without...

@ray74 Do you have a balancer for the Lead Acid batteries?

@supered9000 That's correct and I'm glad you were able to figure that out! We rarely have that issue where the cables get wired wrong, but it does hap...

@eg4eric Could we schedule a time today to do this? I just want to make sure I do it correctly

@fsbma1 When you apply a 57V charging voltage at ≤140A. This will ensure a safe power threshold for the battery to reach the Cell Overvoltage Alarm at...

@solar1solo I’m glad we were able to get in contact and start the process for replacing your inverter. Please don’t hesitate to reach out if you encou...

@subguy There is no way to schedule it as of now, you would have to do it manually.

@bobc The 200A rating from the grid represents the maximum total current available to the home, enforced by the main breaker. Both the backup panel a...

@captjwhThis is the Master inverter- 54100E0159 This is the Slave inverter- 54100E0143   The Gridboss does not have any data in it, as ...

Good Morning. Thank You! I figured as much. I've been in IT for over 40 years, and i'm always glad to help!

@dfwtinker Happy New Years!Thank you for the feedback. I will share this information with our team to ensure the numbers are correct and accurate. I’v...

@eg4eric I don't have an installer account. 🙁 It would be absolutely great if you could snapshot that data! Grid Boss 5263850587FlexBOSS21 54100...

Those are two 1000AH batteries in series which keeps them at 1000AH.

Lead acid, two 24-volt fork-lift batteries wired in parallel. All three inverters are individually hooked across the 48 volts. I should state that the...

Hello, ..I know this thread is a year old but I'm curious if you ever connected your solar panels in the way you asked? What you asked is what I have ...