Yes, that's exactly what I do. I use a small 2,000 watt 120VAC generator through a Chargeverter. This is a manual start/stop solution and bat...

  We are pretty sure the initial "proposed" is not good, we have modified it.

  Your batteries are all balanced, indicated by the voltages being the same, and guaranteed by the fact that you have them all tied together in...

Do you have other Ecoflow products? If you aren't in their ecosystem and looking at the 1KwH battery would AnkerSolix be a consideration? They have ...

I recently had an EG4 12000XP installed. It powers a sub panel that serves my kitchen (not including the electric range), microwave, dish washer, ref...

@eg4eric Could the small 120V gen be connected through a Chargeverter to charge the batteries directly? This solution would probably be less cost tha...

@dougl I can confirm that switching back to the A channel which shares the WiFi dongle works fine. I also slowed down my data polling to 60 seconds an...

If a person intends to use this inverter off-grid, what is the max input and output one can expect to achieve with ~60 panels and 10 12k batteries?

@pawnee Yep, that was it. Thanks! That is not documented very well.

@eg4eric Yes, that was it. It was set to the default of 60 I think. I raised it substantially and it works now. That's a bit of a confusing setting....

Are you able to share your station name or inverter's serial number so I can look into this for you?Prior to getting the E017, did you have any issues...