The recommended charging/discharging value is 140A. 200A is the maximum output current.

You can configure PV Charge Priority so the batteries charge first, and once they are full, the inverter will use solar power to supply the loads.

Would it be possible to add support for multiple inverters? I'm only able to add one of my 6000XP ATM. Thanks for doing this!

YES! I believe this (as is described) is what's happening to me now! Many repeated blackouts, restarts, and standby modes for no apparent reason. Two ...

Sorry, this is for the GridBoss smart loads. Inverter would be the FlexBoss21

Which system are you referring to?

@petekovacs1960 Currently, BMS Tools is the only software compatible with the Lifepower4-V2. I am not aware of BMS Test supporting the Lifepower4-V2 i...

Thanks Eric, but I'm still having an issue with this. My "Existing AC Coupled System" is connected to SP1. When the system first went in and the gri...

Thanks so much. I suspected that it was because the batteries were nearly full. I thought I might have a bad setting or something. Just recently in...

Nevermind. I dropped onto the Demo site and it appears that the button is informational and shows the cumulative gen runtime. Kind of cool but I ...

It all looks correct if there are no loads. The battery is sufficiently full(the 99% may just be itself stabilizing after a charge). I see this fai...

With the battery at 99-100% SoC there is no place to power to go, so PV array does not produce power. Turn some loads on and you will see the PV pro...

Is there any progress with getting BMS_Test working with Lifepower4 v2 batteries. Not intending to criticize, but the BMS Tools GUI is awful compared ...