Master unit 44700E0278 My slave unit 52601N0070 continues flashing its green normal light during operation but yet no alarms are pending or showin...

I got some feedback from EG4 support. Their preference in this situation is for us to install a meter collar (aka feeder tap) and make the interconnec...

@powerup That makes sense. The EG4 inverter let's you set time of day and do sell back without the CTs?

@cptmorgemaker We just tested this and it is working perfectly. If you are having issues, it could be happening only with certain settings set. Can yo...

@eg4eric I had a licensed electrician do the wiring between the main panel and the inverters, I did the wiring to the panels and cabled the batteries ...

@gigadude I am going to get with our team about this and show them the wiring diagram. I will let you know if we need anything else.

One common cause for confusion with this is that if your BMS transitions from blocking charging to allowing charging, the EG4 will show that charging ...

Another alternative to the Netgear switch is the LINOVISION POE++  

Multi-Camera Security Equipment & Configuration; I have been asked by another forum member to post information about the equipment I am using fo...

@wardo5757 Do you know if this fixed the 50/60 Hz issue? My inverter was being forced into 50Hx when my generator warms up, and it does not switch ba...

@eg4eric I think this topic was mistakenly marked "solved", I still need help getting my inverter fixed. Was the circuit diagram I sent sufficient or ...

Just an update on this issue: With the last firmware update ceaa-0709 Generator Switching is fixed. Switching from batteries to gen power is seamles...

@eg4eric Thanks Eric! Also- just tested the gen switching- Folk, they fixed it! It’s not perfect but it’s good. There’s still a hiccup when swit...

  From the Monitor website. "It is for absolute zero-export, when there is an AC connection. When enabled, the battery discharges power to lo...