I do not have land to build a decent solar array. So, after thinking a bit. I came to the conclusion that a "free nights" plan and enough batteries ...

I am assuming that I should set setting #7 to 58.4v and #8 to 55.2v since I found this after posting my message. Is there anything else I should chan...

Thank you for sharing that!It appears to be a small bug. I'm not exactly sure what the other voltage represents. It seems like it could be each invert...

It should automatically detect it; however you can manually set it to 120/208 through the application settings on the Monitoring website, or you can u...

You can set the inverter to Lead acid, which will charge and discharge the battery by voltage. Do you know if the battery BMs has any protocols from t...

It depends on the distributor from whom you purchased your system. Each distributor has their own code. Who is your distributor?You can use EG4LUX01 f...

From the manual it looks like you could land your AC Coupled solar on the 12000XP's Smart Port. 11.2 AC COUPLING The smart load port allows the use...

I believe it is best to contact the place where you purchased tha 12000xp. They should be able to provide the code. I bought my 6000xp from Signature ...

I don't understand why you couldn't parallel the start relays to control the generator. Any gridboss calling for the generator to start then gets powe...

@eg4eric Please give a deep dive into this requirement. I have a system with 2 flexbos 21 inverters. That equates to a huge generator. NOTHING in ...