It appears to only do the separate voltages when I have both inverters running in parallel ( I have a Denali EV and a 19kw charger, when not charging ...

@sdutremble They're all made in China.

I found using a 3/4" plywood covered with 1/4" drywall helped make mounting way easier. For example form my 18kPV and first battery I opened the wall...

@eg4eric this is no solution AC Charge will have you pay for more grid use. All is needed is a software update that will enable when to go back yo bat...

@jaredmauch Hi Jared, Yes - i have a parallel set of 18KPVs, each a different hardware version. Using two RJ45 dongles for EG4 support and the site-...

Hello, EG4. Is there any condensate pumps installation information available to help us with this install? We are uncertain by the available schematic...

This is actually the first time I’ve heard of using a signal cord in this type of setup. I’m not sure if it would work or how it would work.

As long as the generator settings are configured with the correct start and stop SOC values, the FlexBoss will automatically switch to using the gener...

Are you looking for an installer?

You can enable AC Charging, which allows the batteries to charge from the grid up to the specific percentage you set.

@wardo5757 Thank you!

it every time but often.