@twistedroutes We apologize for the delayed response. Thank you for sharing this!

Make sure the time zones on your user and station under the Configuration tab are the same. If not, this can cause issues with the data being received...

This is certainly interesting! I will discuss this with the team to investigate further. It may not have successfully received the correct information...

Are you able to share your discharge settings and your peak shaving settings?

@talk2dang Does your dongle have a button on the bottom? If it does, you can hold that button for about 5 seconds and it will reboot the dongle. Also,...

@hanzi The low voltage you’re seeing on the PV inputs is due to the PV and batteries sharing the same DC bus. As a result, there will be very little v...

@talk2dang Is the router close to the dongle?

Which firmware version are you running on the 18kPV and What do you have the Lithium type/brand set to?

@hanzi Thank you for this! Let me share this with our team and I will update you as soon as we have an answer.

@zeppelin Are you using a 120V or 240V generator and are you charging the batteries at 70A with the chargeverter?

@zeppelin Have you tried charging the batteries with only the chargeverter, no PV? If so, do you get the same results?

@Joel-brodeur @pawnee Could you both send me a private message with your inverter's serial number? I'd like to review some data and verify that everyt...

@hanzi When you measured the PV input at the inverter, were the batteries still connected? If so, try disconnecting the battery power and measuring ag...

Sorry for the late response! I try to answer as soon as possible! Yes, this makes sense, Since the inverter must convert AC to DC to charge the batter...

Is the "Grid Boss Enable" option Enabled?This would be located in the settings on the top right under "Working Mode" and then under "Advanced settings...