Yes - That was one of the many things that I have already done. Everything was fully powered down at the inverter. Then I also have been doing a soft ...

So I updated my LCD screen to 23/1/1. Still no change and still missing my solar 3 in the Web app. and -  

Sorry - I now see the V23 firmware. Still - go ahead and remotely update it.

Yes - I had verified both the voltage and current for all 3 MPPT inputs and all are accepting power on there inputs. So the inverter is actually using...

@eg4eric Sorry, meant to post last message directly to you and not to all.

I had been communication with Dominick Wheeler at Current Connected. I had recently placed an order for the dongle through them and the order date had...

BTW My home assistant reports all 3 PV inputs -

@eg4eric 4282670038

Update on Ethernet dongle. Apparently EG4 has been updating this dongle and had halted shipments of it. My understanding is that EG4 is releasing a ha...

So I see that there was an firmware update for the FlexBoss/18KPV/12KPV, which bumped it from EG4_FAAB-2122 to EG4_FAAB-2525. I installed this hoping ...

I had a somewhat similar problem with my GridBoss and it's dongle. most of the time it would work but sometimes would drop the WIFI signal. Determined...

Just checking again - Any updates from the team on getting AC couple mode working again on 18kPV when a GridBoss exists?

Any updates from the team on getting AC couple mode working again on 18kPV when a GridBoss exists? Again, In my case, I'm not trying to use the AC c...

Found that Weather Optimizer was enabling AC Charge mode. Note that when enabled by Weather Optimizer settings, it never gets disabled by it, even if ...