@johnaand If you send me a DM with your inverter's serial number, I can look into this issue and see what could be causing this to happen.

My Flexboss21 switched to DST on its own again. I'm in Arizona and we do not do DST. I haven't gone back through the data to see when it switched it...

@jckemp3 You're saying that even if the batteries don't hit that start SOC parameters, it still uses grid if it's within the time set?

@eg4eric I didn’t do anything it just finally took it. Sorry for the slow response

@jamisonworkshop I apologize for the delay. We were able to successfully reset the data for you.

Github runnet the link was removed  

Can you please share your ticket number or inverter's serial number so I can look into this issue for you?

Can you please share a picture of the inverter?Those 2 ports are not usable, since the inverter does not use CT's.

My 2 cents. I don't know if the 12000XP supports monitoring through RS485. I do have a 18KPV and it does have a terminal block that has RS485 on it - ...

  Nature ALWAYS wins! We just THINK we have game! (The proof is in! and it ain't pretty.) The short version: Don't believe the IP ratings of...

And Yes. the fans appear to be able to be ramped and under PWM control. The fan speed algorithm is probably based on an internal heat sink temperature...

For me, it appears that the fans prior to FAAB-2727, they were turning on at ~130 - 140F. See temperature plot as fans cycle. After FAAB-2727, t...

Any stats on how many folks have applied this patch? Any feedback from the community?