@eg4eric Obviously the battery voltage varies over the course of a day. Attached is the graph showing the battery voltage for that day. The cut-off ...

Do you think I could get a reply to this soon? Seems like a straightforward answer should be easily available.  

found out its a loose wire or bum MC4, all is fine

Thanks for your replies. After much effort and many hours of calls and adjustments by both my installer and EG4 support, it appears as though my probl...

@jamcandles If you have our EG4 Indoor WallMount batteries, we recommend operating the batteries with an 80% DoD. This helps minimize SOC drift, mai...

Got it. THX   🙂

@krzysiek_kta You should be able to select it through this option

You should not be experiencing any of these issues, especially after updating the battery firmware. I recommend contacting our Technical Support Tea...

Do you know what the voltage was on the batteries?Also, what do you have the on-grid Discharge cut-off Percentage or Voltage set to?

I’ve finally got all this working! I outdoor that the dongle had to be removed for me to get good data from the rj45 connection just above the Batt Co...

I should have added that as soon as I start to use battery storage, or even a combination of PV and battery, the Inverter temp starts to rise rapidly....

Correct: Cell delta accross the pack reaches a maximum of 0.08V during balancing cycles; I had the decimal shifted in my prior post.