@wildbillpdx If you are trying to get a 280ah WallMount battery, a Lifepower4-V2 and a Lifepower4-V1 you shouldn't need the multipack firmware. Just m...
@bobandroslynFor the 18kPV the lowest that it can be set to is 140v.
I realize this is an old post, but I need the multi pack software. I just bought a 280ah wall mount battery and I need to integrate that with a 48v r...
@solar2025 I do not think in off-grid mode there is a way to see the grid tie loads, someone from EG4 will have to confirm if that is correct. sorr...
Note FAAB-2727 firmware and cc @eg4Eric
@heshy the beta firmware 080a works "almost as expected", but still not officially released as far as I know
CTs are between the meter and the main grid panel.
Eric, Thanks for the kind response, i was wondering about those others. I'm in between the 12k XP and Growatt SPF-4000-12000T DT 12kw lo...
@solar2025 Are your CT's on the breaker feed to your backup panel or feed from meter to panel ?
@jckemp3 I am always in offgrid mode. Today since midnight all reported consumption was provided by battery and/or solar. The monitor app reported z...
@solar2025 Sorry I tried to edit my post but I was not allowed too. After rereading your question here is my thought Put your system in offgrid mode...
@solar2025 I think "consumption" is the value you are looking for from the monitor website/software . As long as your CT's are above the main breaker ...
My post did not generate much interest. Basically, with the CTs already in place, I was hoping to track grid use daily and monthly to compare with my...